How Much Is Deluxe Lifecote Paint

Estimating paint... how much paint do I need?

From the Resene pigment and decorating problems solver

To decide how much paint you need for your project you lot volition need the following information:

Expanse of the surface(south) to be painted (excluding areas where there are windows, doors etc).
Spreading rate of the paint beingness used.
The number of coats needed.

For case:

To paint the living room walls excluding the ceiling. The walls are 3 metres high, each wall is approx iv metres in width, and windows and doors make up approx 0.5 of a metre of each wall leaving a paintable surface of iii.5 metres per wall. The expanse to paint is therefore 14 metres (4 walls 10 3.5 metres each) 10 3 metres high = 42 square metres.
The walls are currently painted and are in good condition. Resene SpaceCote Depression Sheen is the selected paint system. The product characterization and data sheet tells united states of america that information technology has a theoretical spreading rate of eleven foursquare metres per litre. (You tin can view product data sheets and labels here to become the spreading rate info for the product you program to employ.)
As the walls are previously painted and in good status, but two coats of Resene SpaceCote Depression Sheen are required.

The amount of paint required is therefore:

Expanse: 42 foursquare metres

Divided by
Spreading charge per unit: eleven square metres per litre

Multiplied by
Number of coats: two coats

Equals
42/11 x ii = 7.half-dozen litres

This tells us that 7.6 litres of paint is required to paint ii coats onto the living room walls. The all-time thought would then exist to purchase viii litres giving enough paint to complete the job and sufficient to go back if touch up is required afterward.

To brand calculating your paint requirements even easier, utilise the calculator below.

Paint Figurer

To work out how much paint is needed for your interior or exterior project apply our paint calculator:

If you know the 'Surface area' enter it in the 'Surface area' box beneath, then 'Spreading charge per unit' and 'Number of coats', then click the 'Calculate' button.
To calculate the surface expanse enter 'Height/length' and 'Width' of surface area to exist painted, click 'Calculate Surface Surface area' and enter spreading rate and number of coats, click 'Summate'.

(Surface area / Spreading charge per unit) x Number of coats = the litres of paint required

Calculator - How much paint do I need

If you change data entered into the fields below, ensure yous printing the calculate buttons again to re-run the equations and go the new answers.

Surface Area(1000^two):

Spreading charge per unit(grand²/L)

No. of coats

Calculated result:

Litres in total

NB: Porous surfaces and shapes (ie corrugated iron) will require more pigment.

Roof painting tip

A expert rule-of-pollex for calculating the quantity of roof paint required is: your project's footprint expanse plus about twoscore% (allows for roof pitch, corrugations, soffit overhang, etc). Trough section roofing can require significantly more. Typically a complete roof paint arrangement requires surface training using Resene Roof and Metallic Launder, one coat of primer and two coats of topcoat at the recommended coverage rate on the cans.

Quick steps...

To estimate pigment litres from house plans

To get a rough idea of how much paint y'all will approximately need when you only take house plans to piece of work from, employ the post-obit calculations…

Look for the statement of area on the house plans – e.one thousand. 186m²

Divide this by

10 = litres of sealer for ceilings
5 = litres of 2 coats for ceilings
4 = litres of sealer for walls
2 = litres of two coats for walls
25 = litres of primer for trim/doors/frames
fifteen = litres of 2 coats for trim/doors/frames

Enter the square area (one thousand²) of house programme below and press "Calculate"

You will demand...